Smart Marker Pen Graffiti Remover

Smart Marker Pen Graffiti remover is a fast-acting, liquid graffiti remover that works effectively on porous and non-porous surfaces.

It is formulated for use on many different porous and non-porous surfaces both interior and exterior and is very effective at removing graffiti from marble, concrete, slate, plastics, perspex*

Exterior and Interior Graffiti removal process: (not Perspex)

1. Put on your protective clothing, safety googles and gloves
2. Check the surface for excess dirt: The surface does not have to be perfectly clean but if there is a lot of traffic film, soot or substantial dirt, it is advisable to clean or power wash this off first.
3. Always test a small hidden area prior to full application
4. Shake the product thoroughly to activate it and pour the required amount of product onto rag, sponge or triple 000 wire wool and dab liberally onto the graffiti.
5. Let the product activate on the surface for about 60 seconds, then agitate with a rag, sponge or triple 000 wire wool
6. Wash off with water using a new rag or pressure washer
7. repeat steps 4-7 if necessary

Please note that the graffiti removal is enhanced for ingrained graffiti if you overspray the graffiti remover with WD40 or similar product for 2 minutes.

*ON PERSPEX surfaces, apply using a towelling rag and agitate then with a dry or only slightly damp cloth remove the graffiti. DO NOT WASH OFF WITH WATER AS THIS MAY CAUSE THE SURFACE TO TURN AN OPAQUE WHITE COLOUR. DO NOT USE WIRE WOOL ON PERSPEX AS IT MAY SCRATCH THE SURFACE.

Equipment needed

1. Smart Marker Pen Graffiti remover
2. Safety equipment (chemical resistant gloves, goggles etc)
3. Supply of water
4. Rags, sponges, triple 000 wire wool, sprayer

Results and Benefits

Smart Marker Pen Graffiti Remover dramatically reduces the time it takes to remove graffiti, one ap-plication is effective in removing the typical graffiti, with no damage to the original underlying surface, within minutes saving significant time and labour costs.

Coverage

Varies dependent upon type of surface material 0.2 – 0.5 litre/m²
Wipes 0.1 – 0.3 litre/m²

This product is for use by professional contractors only – this user guide should be read prior to using Smart Marker Pen Graffiti remover. The SDS sheet and User guide documents must legally be kept in the vehicle(s) and storage areas at all times.

SMART MARKER PEN GRAFFITI REMOVER IS FOR PROFESSIONAL USE ONLY. NOT TO BE USED FOR ANY OTHER PURPOSE. NOT FOR RESALE. DO NOT MIX WITH ANY OTHER PRODUCT. TRIAL ON A SMALL INCONSPICUOUS AREA PRIOR TO FULL APPLICATION.

• USE NEAT – DO NOT DILUTE
• WET SURFACE PRIOR TO APPLICATION
• ONLY POUR THE REQUIRED AMOUNT INTO A POLYPROPYLENE CONTAINER
• DO NOT POUR ANY UNUSED METAL SAFE BACK INTO CONTAINER AS IT WILL CONTAMINATE THE REST OF THE PRODUCT

EVERY USER OF THIS PRODUCT SHOULD WEAR SAFETY GOGGLES, CHEMICAL RESISTANT GLOVES AND CAREFULLY FREAD ALL APPLICATION AND SAFETY INSTRUCTION BEFORE USING

Ingestion: DO NOT induce vomiting, drink 1 – 2 glasses of water, seek medical attention
Skin Contact: Wash of immediately with plenty of soap and water, remove contaminated clothing, flush skin with running water. Seek medical attention if irritation or symptoms persist
Eye Contact: Rinse continuously with water for at least 15 minutes, holding the eyelids open. Seek medical attention. If can be done easily done remove contact lenses
Spills/leaks: Absorb on inert absorbent and transfer to a container. Prevent spillage from entering natural waters/land drains.
FIRE: Use water fog or fine water spray. Emergency workers to wear full protective clothing including breathing apparatus.