EcoChem Multi Surface Algae Remover 1L (makes up to 20L)

Removes algae, moss and lichen without damaging surfaces

ECOCHEM Multi Surface Algae Remover is highly effective at killing algae, moss and lichen on hard surfaces. It’s fully biogradeable, eco-friendly, long lasting and contains no bleach or acid.

Our best selling algae, moss and lichen remover is antibacterial, safe for use where children and pets play and safe for use on hard landscaping such as paving blocks, slabs, tarmac, chips, brickwork, stone, roofs etc. Great for cleaning sports courts such as tennis courts, netball courts etc.

Don’t apply product if the surface is wet or rain is expected in the next 12 hours.

For heavy moss growth-ensure moss is brushed off exposing moss stem before treatment.

Allow a contact time of 2-4 days. Not for use on real grass.

This product will also clean black mould but residual black mould staining may be persistent. Repeat applications may be necessary.

If in doubt with any surfaces, test product on a inconspicuous area.

Restrict child and pet access to the area while the area is wet.

Trade / DIY benefits

• Concentrate – makes up to 20L
• Biodegradable
• Eco-friendly
• Long lasting
• Bleach free
• Acid free
• Antibacterial
• Pet safe

Trade / DIY applications

• Hard landscaping cleaner
• Paving block cleaner
• Patio cleaner
• Slab cleaner
• Tarmac cleaner
• Chip cleaner
• Brickwork cleaner
• Stone cleaner
• Roof cleaner
• Slate cleaner
• Fence cleaner
• Deck cleaner
• Tennis court cleaner
• Play area cleaner
• Black mould cleaner (staining may be persistent)

How to Step-by-Step

1. Dilute 1:4 of product with water for normal use (coverage = 40m²)
2. Dilute 1:9 of product with water for light growth (coverage = 90m²)
3. Apply with a sprayer, brush, watering can with rose etc.
4. Leave for 2 to 4 days before rinsing off with water.
5. Rinse out applicator after use.

What you’ll need

• Bucket
• Sprayer or Brush or Watering can with rose

Coverage

Coverage rate is dependent upon level of cleaning required. Dilute 1:4 of product with water for normal use (coverage = 40m²). Dilute 1:9 of product with water for light growth (coverage = 90m²)